Page 6 - Maintenance Update

Disinfectant Considerations

Danske Bank – Vilnius / Lithunia Boston Scientific – Paris / France

Carpet Collection: Clerkenwell / Triangular Path LVT Collection: Original Collection / Eero

Regardless of which active Frequency: Residual chemicals: Chemical concentrations Pre-test every cleaning

ingredient is chosen, it’s and dilution: and disinfecting agent:

important to consider a One-time application of ECHA Most virucidal disinfectants When required, special care As with any cleaning product,

few primary concerns as approved broad use virucidal require removal after being should be taken to properly test the cleaning or disinfecting

facilities consider the need disinfectants is generally well applied in order to remove dilute the virucidal disinfectant. agent to be used on a scrap

for regular application of tolerated. The main concern residual active and other added Refer to the virucidal disinfectant piece of the same flooring first.
ingredients that may build up
manufacturer’s user manual and
If no scrap is available, test in
is the impact to flooring
virucidal disinfectants: where repeated and frequent over time. For soft surfaces this equipment manufacturer’s user an inconspicuous area. Allow
application takes place. will typically involve an extraction manual for specific application test area to completely dry; then

To minimise the impact of process (powder based or hot instructions. check for any physical change

higher frequency application, water extraction) at regular before proceeding. If there is a

regular extraction is needed intervals. This interval will vary physical change, do not continue.

to remove residual chemicals depending on the frequency of Pretest additional products until

from the floor. application and the disinfecting a safe product is found or call a

agent used. professional cleaning technician.